cwr06 www.vishay.com vishay sprague revision: 27-feb-13 1 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum surface mount capacitors t antamount ? conformal coated, military mil-prf-55365/4 qualified features ? weibull failure rates b, c, d, t exponential failure rates m, p, r, s ? tape and reel available per eia 481 ? termination finishes available: gold plate, solder plated, solder fused and hot solder dipped ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. performance characteristics operating temperature: - 55 c to + 125 c (above 85 c, voltage derating is required) capacitance range: 0.10 f to 100 f capacitance tolerance: 5 %, 10 %, 20 % voltage rating: 4 v dc to 50 v dc notes (1) contact marketing for availability of we ibull d failure rate for 50 v ratings (2) t level requires surge current option c. capacitors are recomm ended for space applications. shipped in tape and reel/or waf fle packaging only. note ? when solder coated terminations are required, add 0.015" [0.38 mm] to termination dime nsion tolerances ordering information cwr06 d b 155 k b a /tr type voltage termination finish capacitance capacitance tolerance failure rate %/1000 h surge current (optional) packaging c = 4 v d = 6 v f = 10 v h = 15 v j = 20 v k = 25 v m = 35 v n = 50 v b = gold c = hot solder dipped h = solder plated k = solder fused this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. j = 5 % k = 10 % m = 20 % m = 1.0 p = 0.1 r = 0.01 s = 0.001 b = 0.1 c = 0.01 d = 0.001 (1) t = 0.01 (2) a = 3 cycles at + 25 c b = 3 cycles at - 55 c and + 85 c c = 3 cycles at - 55 c and + 85 c (before weibull grading) blank = bulk, plastic tray /fa = waffle pack /pr = 100 pcs reel /hr = half reel /tr = full reel dimensions in inches [millimeters] case code l w h p t 1 t 2 (max.) a 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] b 0.150 0.015 [3.81 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] c 0.200 0.015 [5.08 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] d 0.150 0.015 [3.81 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] e 0.200 0.015 [5.08 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] f 0.220 0.015 [5.59 0.38] 0.135 0.015 [3.43 0.38] 0.070 0.015 [1.78 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] g 0.265 0.015 [6.73 0.38] 0.110 0.015 [2.79 0.38] 0.110 0.015 [2.79 0.38] 0.050 0.005 [1.27 0.13] 0.005 [0.13] 0.015 [0.38] h 0.285 0.015 [7.24 0.38] 0.150 0.015 [3.81 0.38] 0.110 0.015 [2.79 0.38] 0.050 0.005 [1.27 0.13] 0.005 [0.13] 0.015 [0.38] w l p h p weld and dimple projection identifies anode (+) terminal -+ t 1 - t 2 (max.)
cwr06 www.vishay.com vishay sprague revision: 27-feb-13 2 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and case codes f 4 v 6 v 10 v 15 v 20 v 25 v 35 v 50 v 0.10 a 0.15 a 0.22 ab 0.33 ab 0.47 abc 0.68 a b b c d 1.0 a b c d e 1.5 a b c d e f 2.2 a b c d e f 3.3 b c d e f g 4.7 b c d e f g h 6.8 c d e f g h 10 d e f g 15 e f g h 22 f g h 33 f g h 47 g h 68 g h 100 h standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c 4 v dc at + 85 c; 2.7 v dc at + 125 c 2.2 a cwr06c(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 4.7 b cwr06c(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 6.8 c cwr06c(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5 10 d cwr06c(1)106(2)(3)(4)(5) 1.0 10 12 8 8 10 4.0 15 e cwr06c(1)156(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5 33 f cwr06c(1)336(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2 68 g cwr06c(1)686(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1 100 h cwr06c(1)107(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9 6 v dc at + 85 c; 4 v dc at + 125 c 1.5 a cwr06d(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 3.3 b cwr06d(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 4.7 c cwr06d(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5 6.8 d cwr06d(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5 10 e cwr06d(1)106(2)(3)(4)(5) 1.0 10 12 8 10 12 3.5 22 f cwr06d(1)226(2)(3)(4)(5) 2.0 20 24 8 10 12 2.2 47 g cwr06d(1)476(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1 68 h cwr06d(1)686(2)(3)(4)(5) 4.0 40 48 10 12 12 0.9 notes ? part number definitions: (1) termination finish: b, c, h, k (2) capacitance tole rance: j, k, m (3) failure rate: b, c, d, m, p, r, s, t (4) surge current (optional): a, b, c (5) packaging: blank, /fa, /hr, /pr, /tr (1) 5 % tolerance is not availabl e for the 0.33 f/50 v design
cwr06 www.vishay.com vishay sprague revision: 27-feb-13 3 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c; 7 v dc at + 125 c 1.0 a cwr06f(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0 2.2 b cwr06f(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 3.3 c cwr06f(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5 4.7 d cwr06f(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5 6.8 e cwr06f(1)685(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5 15 f cwr06f(1)156(2)(3)(4)(5) 2.0 20 24 8 8 10 2.5 33 g cwr06f(1)336(2)(3)(4)(5) 3.0 30 36 10 12 12 1.1 47 h cwr06f(1)476(2)(3)(4)(5) 5.0 50 60 10 12 12 0.9 15 v dc at + 85 c; 10 v dc at + 125 c 0.68 a cwr06h(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0 1.5 b cwr06h(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 2.2 c cwr06h(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.5 3.3 d cwr06h(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0 4.7 e cwr06h(1)475(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0 10 f cwr06h(1)106(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5 22 g cwr06h(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 1.1 33 h cwr06h(1)336(2)(3)(4)(5) 5.0 50 60 8 8 10 0.9 20 v dc at + 85 c; 13 v dc at + 125 c 0.47 a cwr06j(1)474(2)(3)(4)(5) 1.0 10 12 8 8 10 16.0 0.68 b cwr06j(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 14.0 1.0 b cwr06j(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0 1.5 c cwr06j(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0 2.2 d cwr06j(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 5.0 3.3 e cwr06j(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0 6.8 f cwr06j(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 2.4 15 g cwr06j(1)156(2)(3)(4)(5) 3.0 30 36 6 8 8 1.1 22 h cwr06j(1)226(2)(3)(4)(5) 4.0 40 48 6 8 8 0.9 25 v dc at + 85 c; 17 v dc at + 125 c 0.33 a cwr06k(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 15.0 0.68 b cwr06k(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0 1.0 c cwr06k(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5 1.5 d cwr06k(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5 2.2 e cwr06k(1)225(2)(3)(4)(5) 1.0 10 12 6 8 8 3.5 4.7 f cwr06k(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5 6.8 g cwr06k(1)685(2)(3)(4)(5) 2.0 20 24 6 8 8 1.2 10 g cwr06k(1)106(2)(3)(4)(5) 3.0 30 36 6 8 8 1.4 15 h cwr06k(1)156(2)(3)(4)(5) 4.0 40 48 6 8 8 1.0 standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c notes ? part number definitions: (1) termination finish: b, c, h, k (2) capacitance tole rance: j, k, m (3) failure rate: b, c, d, m, p, r, s, t (4) surge current (optional): a, b, c (5) packaging: blank, /fa, /hr, /pr, /tr (1) 5 % tolerance is not availabl e for the 0.33 f/50 v design
cwr06 www.vishay.com vishay sprague revision: 27-feb-13 4 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 35 v dc at + 85 c; 23 v dc at + 125 c 0.22 a cwr06m(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 24.0 0.47 b cwr06m(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0 0.68 c cwr06m(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 10.0 1.0 d cwr06m(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.5 1.5 e cwr06m(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.5 3.3 f cwr06m(1)335(2)(3)(4)(5) 1.0 10 12 6 8 8 2.5 4.7 g cwr06m(1)475(2)(3)(4)(5) 2.0 20 24 6 8 8 1.5 6.8 h cwr06m(1)685(2)(3)(4)(5) 3.0 30 36 6 8 8 1.3 50 v dc at + 85 c; 33 v dc at + 125 c 0.10 a cwr06n(1)104(2)(3)(4)(5) 1.0 10 12 6 8 8 22.0 0.15 a cwr06n(1)154(2)(3)(4)(5) 1.0 10 12 6 8 8 25.0 0.22 b cwr06n(1)224(2)(3)(4)(5) 1.0 10 12 6 8 8 17.0 0.33 b (1) cwr06n(1)334(2)(3)(4)(5) 1.0 10 12 6 8 8 12.0 0.47 c cwr06n(1)474(2)(3)(4)(5) 1.0 10 12 6 8 8 8.0 0.68 d cwr06n(1)684(2)(3)(4)(5) 1.0 10 12 6 8 8 7.0 1.0 e cwr06n(1)105(2)(3)(4)(5) 1.0 10 12 6 8 8 6.0 1.5 f cwr06n(1)155(2)(3)(4)(5) 1.0 10 12 6 8 8 4.0 2.2 f cwr06n(1)225(2)(3)(4)(5) 2.0 20 24 6 8 8 2.5 3.3 g cwr06n(1)335(2)(3)(4)(5) 2.0 20 24 6 8 8 2.0 4.7 h cwr06n(1)475(2)(3)(4)(5) 3.0 30 36 6 8 8 1.5 standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c notes ? part number definitions: (1) termination finish: b, c, h, k (2) capacitance tole rance: j, k, m (3) failure rate: b, c, d, m, p, r, s, t (4) surge current (optional): a, b, c (5) packaging: blank, /fa, /hr, /pr, /tr (1) 5 % tolerance is not availabl e for the 0.33 f/50 v design
cwr06 www.vishay.com vishay sprague revision: 27-feb-13 5 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) a 0 , b 0 , k 0 , are determined by the maximum dimensions to the ends of the terminals extending from the component bo dy and/or the body dimensions of the component. the clearance between the ends of the terminals or body of the co mponent to the sides and depth of the cavity (a 0 , b 0 , k 0 ) must be within 0.002" (0.05 mm) minimum and 0.020" (0. 50 mm) maximum. the clearance allowed must also prevent rotation of the component within the cavity of not more than 20. (2) tape with components shall pass around ra dius r without damage. the minimum trailer length may require addi tional length to p rovide r minimum for 12 mm embossed tape for reels with hub diameters approaching n minimum. (3) this dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between th e embossed cavities or to the edge of the cavity whichever is less. (4) this dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed ca vity or to the edge of th e cavity whichever is less. (5) the embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. dimensions of embossement location shall be a pplied independent of each other. (6) b 1 dimension is a refere nce dimension tape feeder clearance only. tape and reel packaging in inches [millimeters] note ? metric dimensions will govern. dimensions in inches are rounded and for reference only. tape and reel specifications: all case sizes are available on plastic em bossed tape per eia-481. standard reel diamet er is 7" (178 mm). carrier tape dimensions in inches [millimeters] case code tape size b 1 (max.) d 1 (min.) f p 1 t 2 (max.) w a 8 mm 0.179 [4.55] 0.039 [1.0] 0.138 0.002 [3.5 0.05] 0.157 0.004 [4.0 0.1] 0.098 [2.5] 0.315 0.004 [8.0 0.10] b, c, d, e 12 mm 0.323 [8.2] 0.059 [1.5] 0.217 0.002 [5.5 0.05] 0.157 0.004 [4.0 0.1] 0.256 [6.5] 0.472 0.012 [12.0 0.30] f 12 mm double pitch 0.323 [8.2] 0.059 [1.5] 0.217 0.002 [5.5 0.05] 0.315 0.004 [8.0 0.10] 0.256 [6.5] 0.472 0.012 [12.0 0.30] g, h 16 mm 0.476 [12.1] 0.059 [1.5] 0.295 0.004 [7.5 0.1] 0.315 0.004 [8.0 0.10] 0.315 [8.0] 0.642 max. [16.3] max. 0.004 [0.10] max. k 0 t 2 (max.) b 1 (max.) (6) 0.024 [0.600] max. 10 pitches cumulative tolerance on tape 0.008 [0.200] embossment 0.069 0.004 [1.75 0.10] d 1 (min.) for components 0.079 x 0.047 [2.0 x 1.2] and larger (5) . maximum user direction of feed center lines of cavity a 0 p 1 f w 0.030 [0.75] min. (3) 0.030 [0.75] min. (4) 0.079 0.002 [2.0 0.05] 0.157 0.004 [4.0 0.10] 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] b 0 maximum component rotation (side or front sectional view) 20 for tape feeder reference only including draft. concentric around b 0 deformation between embossments to p cover tape to p cover tape cavity size (1) direction of feed cathode (-) anode (+) bending radius (2) r minimum: 8 mm = 0.984" (25 mm) 12 mm and 16 mm = 1.181" (30 mm) r min. 20 maximum component rotation typical component cavity center line typical component center line a 0 b 0 (top view) 0.9843 [250.0] tape 3.937 [100.0] 0.039 [1.0] max. 0.039 [1.0] max. camber allowable camber to be 0.039/3.937 [1/100] (top view) non-cumulative over 9.843 [250.0]
cwr06 www.vishay.com vishay sprague revision: 27-feb-13 6 document number: 40009 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) bulk capacitors are sh ipped in plastic trays (2) t level capacitors are only sh ipped in tape and reel/or wa ffle packaging. contact factory for waffle pack quantities standard packaging quantity case code quantity (pcs/reel) bulk, plastic tray quantity (pcs) 7", full reel (/tr) 7", half reel (/hr) 7", partial reel (/pr) a, b, c, d, e 2500 1250 100 75 f 1000 500 100 75 g 600 300 100 60 h 600 300 100 50 pad dimensions in inches [millimeters] case code width (a) pad metallization (b) separation (c) a 0.065 [1.6] 0.050 [1.3] 0.040 [1.0] b 0.065 [1.6] 0.070 [1.8] 0.055 [1.4] c 0.065 [1.6] 0.070 [1.8] 0.120 [3.0] d 0.115 [2.9] 0.070 [1.8] 0.070 [1.8] e 0.115 [2.9] 0.070 [1.8] 0.120 [3.0] f 0.150 [3.8] 0.070 [1.8] 0.140 [3.6] g 0.125 [3.2] 0.070 [1.8] 0.170 [4.3] h 0.165 [4.2] 0.090 [2.3] 0.170 [4.3] power dissipation case code maximum permissible power dissipation at + 25 c (w) in free air a0.060 b, c 0.075 d, e 0.085 f0.110 g0.120 h0.150 product information conformal coated guide www.vishay.com/doc?40150 pad dimensions package dimensions moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 solid tantalum chip capacitors www.vishay.com/doc?40091 faq frequently asked questions www.vishay.com/doc?40110 a c b b
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
